HP Cool Can Shield Heatshield Products

Whether you are out on the strip, track, or in the desert, it is imperative to protect your expensive race fuel that enables your vehicle to reach maximum performance. HP Cool Can Shields are fabricated from a light-weight aluminized material that act as a UV heat shield for your fuel can or utility jug and protects its contents from solar radiation.

This keeps your race fuel cool, preventing fuel evaporation and keeps the fuel's chemical balance intact. Race fuels are comprised of 100's of chemicals, some burn off quickly at lower temps. A hot can sitting out in the sun and burn off the these chemicals.

This changes your fuel's chemical composition, not that car or bike you had dialed in at your shop has different chemical balance of fuel running through it! This can adversely affect your vehicles performance, and give your competitors an edge.

Utility jugs covered with our heat shields have cooler fuel temperatures by as much as 20 degree F vs. unprotected sun baked fuel containers. In addition to fuel protection, the HP Cool Can Shields will also increase your can's life expectancy by 50 Percent by preventing sun damage.

Features:

• Reflects solar radiation, keeping fuel cool
• Keeps fuel’s chemical balance intact
• Prevents fuel evaporation
• Size: Scribner Plastics 5 Gallon Jug (Square)
• Operational Temperature: 250 Degrees F
• Peak Temperature (30 seconds or less): 5 Degrees F
• Color: Silver/Aluminum
• Material: Aluminized Mylar
• Made in the USA
• Sold As Each

Installation Tips:

• Slide on and Radiant heat barrier, requires 1 Inch of airspace
• Not designed for direct contact

Warnings:

• Caution this material is electrically conductive
• Be sure to insulate any terminals that might come in contact with this product
• Caution static electricity can cause fires or explosions near fuel
• Be sure container is properly grounded before filling with fuel